Sigma Coatings Limited

Product Details:

AMERLOCK 400 GF SIGMASHIELD 400 Glass Flake
Two-component, high solids glass flake reinforced polyamine cured epoxy coating
PRINCIPAL CHARACTERISTICS• Surface tolerant primer/coating for wide use in Marine and Protective Coatings• Glass-flake reinforced for improved impact and abrasion resistance• Excellent resistance to corrosion• Long-term protection at areas subject to heavy wear and tear• Very low water permeability, due to glass flake barrier• Suitable for immersion service• Compatible with cathodic protection systems• Pass cryogenic cyclic test from -196°C (-321°F) to 200°C (392°F)• Designed to prevent corrosion under insulation (CUI) of carbon steel and stainless steel

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only Two-component, high solids epoxy coating

Product Details:

Two-component, surface-tolerant, high-build polyamine-cured epoxy primer/coating. We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr only Two-component, surface-tolerant, high-build polyamine-cured epoxy primer/coating

Product Details:

STEELGUARD 119 W Waterborne Intumescent Coating for Fire Protection
PRINCIPAL CHARACTERISTICS• Provides up to 180 minutes protection from cellulosic fires• Free of halogenated flame retardants and borate compounds• On-site application• Up to 700 μm (28.0 mils) DFT in a single coat• Suitable for C1, C2 and C3 internal environments (ISO 12944) ; for dry internal (C1) environments no topcoat is requiredCOLOR AND GLOSS LEVEL• White• Matt

Additional Information:

• Packaging Details: STEELGUARD 119 W Waterborne Intumescent Coating for Fire Protection PRINCIPAL CHARACTERISTICS • Provides up to 180 minutes protection from cellulosic fires • Free of halogenated flame retardants and borate compounds • On-site application • Up to 700 μm (28.0 mils) DFT in a single coat • Suitable for C1, C2 and C3 internal environments (ISO 12944) ; for dry internal (C1) environments no topcoat is required COLOR AND GLOSS LEVEL • White • Matt

Product Details:

SIGMA VIKOTE 56 Modified Acrylic Finish
PRINCIPAL CHARACTERISTICS• Finish coat for above-water areas• Good gloss and color retention• Resistant to water and splash of mild chemicals• Fast-drying• Can be applied at low temperatures, down to –10°C (14°F)COLOR AND GLOSS LEVEL• White and various other colors (see also SIGMACARE shade card)• Gloss

Additional Information:

• Packaging Details: SIGMA VIKOTE 56 Modified Acrylic Finish PRINCIPAL CHARACTERISTICS • Finish coat for above-water areas • Good gloss and color retention • Resistant to water and splash of mild chemicals • Fast-drying • Can be applied at low temperatures, down to –10°C (14°F) COLOR AND GLOSS LEVEL • White and various other colors (see also SIGMACARE shade card) • Gloss

Product Details:

AMERCOAT 137 Non-Skid Epoxy Primer

Non-Skid Epoxy Primer
Excellent Adhesive
Characteristics. Non-skid primer for Amercoat 138G; Qualified to Mil-PRF-24667, Types I and 2; Excellent adhesion

Additional Information:

• Packaging Details: AMERCOAT 137 Non-Skid Epoxy Primer Non-Skid Epoxy Primer Excellent Adhesive Characteristics. Non-skid primer for Amercoat 138G; Qualified to Mil-PRF-24667, Types I and 2; Excellent adhesion

Product Details:

AMERLOCK 400  SIGMACOVER 400
Two-component, high solids epoxy coating
PRINCIPAL CHARACTERISTICS• High performance self priming universal epoxy• High solids, low VOC• Surface tolerant and abrasion resistant• Compatible with prepared, damp surfaces• Good adhesion on most existing coatings• Available in MIO or conventional pigmented grade• Good resistance to splash and spillage of chemicals• Meets NSF Standard 61 for valves (US manufacturing only)

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr only AMERLOCK 400 SIGMACOVER 400 Two-component, high solids epoxy coating PRINCIPAL CHARACTERISTICS • High performance self priming universal epoxy • High solids, low VOC • Surface tolerant and abrasion resistant • Compatible with prepared, damp surfaces • Good adhesion on most existing coatings • Available in MIO or conventional pigmented grade • Good resistance to splash and spillage of chemicals • Meets NSF Standard 61 for valves (US manufacturing only)

Product Details:

AMERCOAT PSX 700 Two-Component, Engineered Siloxane Coating

Unique, high gloss, isocyanate free solution• Can be applied directly over inorganic zinc• Excellent color and gloss retention• Resists graffiti• High solids, VOC compliant• Applied by brush, roller or spray, without thinning• Good resistance to splash and spillage of chemicals• Can be applied as a single coat, direct-to-metal for moderately corrosive environments (ISO 12944 C1-C3)COLOR AND GLOSS LEVEL• Full color range• High gloss

Additional Information:

• Packaging Details: AMERCOAT PSX 700 Two-Component, Engineered Siloxane Coating Unique, high gloss, isocyanate free solution • Can be applied directly over inorganic zinc • Excellent color and gloss retention • Resists graffiti • High solids, VOC compliant • Applied by brush, roller or spray, without thinning • Good resistance to splash and spillage of chemicals • Can be applied as a single coat, direct-to-metal for moderately corrosive environments (ISO 12944 C1-C3) COLOR AND GLOSS LEVEL • Full color range • High gloss

Product Details:

SIGMAZINC 109 HS Two-Component, High Solids Polyamide Adduct Cured Zinc Rich Epoxy Primer
PRINCIPAL CHARACTERISTICS• Designed as a system primer for various paint systems• Excellent anticorrosive properties• Quick-drying, can be overcoated after a short interval• Can serve as a holding primer for various maintenance systems for a total repair• Very good primer for systems with high solids epoxy buildcoats• Complies with SSPC-Paint 20 level 2 and ISO 12944.5COLOR AND GLOSS LEVEL• Gray, reddish gray• Flat

Additional Information:

• Packaging Details: SIGMAZINC 109 HS Two-Component, High Solids Polyamide Adduct Cured Zinc Rich Epoxy Primer PRINCIPAL CHARACTERISTICS • Designed as a system primer for various paint systems • Excellent anticorrosive properties • Quick-drying, can be overcoated after a short interval • Can serve as a holding primer for various maintenance systems for a total repair • Very good primer for systems with high solids epoxy buildcoats • Complies with SSPC-Paint 20 level 2 and ISO 12944.5 COLOR AND GLOSS LEVEL • Gray, reddish gray • Flat

Product Details:

SIGMACOVER™ 350 ( polyamide cured epoxy primer)
Two-component, high-build polyamide cured epoxy primer/coating based upon pure epoxy technology
PRINCIPAL CHARACTERISTICS• Surface tolerant primer/coating for wide use in Marine and Protective Coatings• Marine use: suitable on topsides, decks, superstructures and cargo holds• Excellent corrosion resistance• Compatible with various aged coatings• Suitable as floor coating for pedestrian traffic with dry to walk on time of 6 hours at 20°C (68°F)• Good impact and abrasion resistance• Smooth film, easy to clean• Resistant to splash and spillage of a wide range of chemicals

Additional Information:

• Packaging Details: SIGMACOVER™ 350 ( polyamide cured epoxy primer) Two-component, high-build polyamide cured epoxy primer/coating based upon pure epoxy technology PRINCIPAL CHARACTERISTICS • Surface tolerant primer/coating for wide use in Marine and Protective Coatings • Marine use: suitable on topsides, decks, superstructures and cargo holds • Excellent corrosion resistance • Compatible with various aged coatings • Suitable as floor coating for pedestrian traffic with dry to walk on time of 6 hours at 20°C (68°F) • Good impact and abrasion resistance • Smooth film, easy to clean • Resistant to splash and spillage of a wide range of chemicals

Product Details:

SIGMADUR 550 Aliphatic Acrylic Polyurethane
Two-component, aliphatic acrylic polyurethane finish
PRINCIPAL CHARACTERISTICS• Unlimited recoatable• Excellent resistance to atmospheric exposure conditions• Excellent color and gloss retention• Non-chalking, non-yellowing• Cures at temperatures down to -5°C (23°F)• Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals• Can be recoated even after long atmospheric exposure• Good application properties

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only Heat-resistant silicone/acrylic finish

Product Details:

SIGMACOVER 525 Two-Component, Polyamine-Cured Epoxy Tiecoat
PRINCIPAL CHARACTERISTICS• Final coat in epoxy underwater anticorrosive systems• Epoxy tiecoat for use with PPG antifoulings as specified• Excellent water resistance• Good abrasion- and impact resistanceCOLOR AND GLOSS LEVEL• Black, gray• Flat

Additional Information:

• Packaging Details: SIGMACOVER 525 Two-Component, Polyamine-Cured Epoxy Tiecoat PRINCIPAL CHARACTERISTICS • Final coat in epoxy underwater anticorrosive systems • Epoxy tiecoat for use with PPG antifoulings as specified • Excellent water resistance • Good abrasion- and impact resistance COLOR AND GLOSS LEVEL • Black, gray • Flat

Product Details:

SIGMA GUARD 720 Two-Component, Reinforced High Solids Tank Coating, Based upon Polyamine Adduct Cured Pure Epoxy Technology

PRINCIPAL CHARACTERISTICS• Tank coating with good chemical resistance against a wide range of chemicals• Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes)• Short curing periods• Good low-temperature curing• Easy to cleanCOLOR AND GLOSS LEVEL• Light green, gray• Gloss

Additional Information:

• Packaging Details: SIGMA GUARD 720 Two-Component, Reinforced High Solids Tank Coating, Based upon Polyamine Adduct Cured Pure Epoxy Technology PRINCIPAL CHARACTERISTICS • Tank coating with good chemical resistance against a wide range of chemicals • Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes) • Short curing periods • Good low-temperature curing • Easy to clean COLOR AND GLOSS LEVEL • Light green, gray • Gloss

Product Details:

SIGMAGUARD 425 (SIGMAGUARD BT) Two Component Solvent Free Amine Cured Epoxy Coating
 two component solvent free polyamine cured epoxy coating PRINCIPAL CHARACTERISTICS – provides long term protection for ballast tanks and steel structures, with excellent resistance against corrosion and seawater – suitable for block stage application – good edge covering capacity – reduces explosion risk and re hazard in conned spaces – can be applied by single feed airless spray equipment COLOURS AND GLOSS grey, green - gloss

Additional Information:

• Packaging Details: SIGMAGUARD 425 (SIGMAGUARD BT) Two Component Solvent Free Amine Cured Epoxy Coating two component solvent free polyamine cured epoxy coating PRINCIPAL CHARACTERISTICS – provides long term protection for ballast tanks and steel structures, with excellent resistance against corrosion and seawater – suitable for block stage application – good edge covering capacity – reduces explosion risk and re hazard in conned spaces – can be applied by single feed airless spray equipment COLOURS AND GLOSS grey, green - gloss

Product Details:

STEELGUARD 651 Waterborne Intumescent Coating for Fire Protection

PRINCIPAL CHARACTERISTICS• Provides up to 120 minutes protection from cellulosic fires• On-site application• Up to 700 μm (28.0 mils) DFT in a single coat• Suitable for C1, C2 and C3 internal environments (ISO 12944) ; for dry internal (C1) environments no topcoat is required• Tested and assessed to EN13381-8, BS476-20/21 and GB14907• CE marked product, ETA 22/0050• assessed to EAD 350402-00-1106 for Z1, Z2 and YCOLOR AND GLOSS LEVEL• White• Matt

Additional Information:

• Packaging Details: STEELGUARD 651 Waterborne Intumescent Coating for Fire Protection PRINCIPAL CHARACTERISTICS • Provides up to 120 minutes protection from cellulosic fires • On-site application • Up to 700 μm (28.0 mils) DFT in a single coat • Suitable for C1, C2 and C3 internal environments (ISO 12944) ; for dry internal (C1) environments no topcoat is required • Tested and assessed to EN13381-8, BS476-20/21 and GB14907 • CE marked product, ETA 22/0050 • assessed to EAD 350402-00-1106 for Z1, Z2 and Y COLOR AND GLOSS LEVEL • White • Matt

Product Details:

VIKOTE 18 High-Build Aluminium Pigmented Chlorinated Rubber Primer, Sealer
DESCRIPTIONHigh-build, aluminum pigmented chlorinated rubber primer/sealerPRINCIPAL CHARACTERISTICS• Anticorrosive primer/sealer• Excellent water resistance• Unsaponifiable• Resistant to well designed/controlled cathodic protection• Fast-drying• Can be applied at low temperatures, down to –10°C (14°F)• Tolerates a DFT up to 150 μm (6.0 mils) at overlaps without sagging• Compatible with antifoulingsCOLOR AND GLOSS LEVEL• Light and dark gray• Flat

Additional Information:

• Packaging Details: VIKOTE 18 High-Build Aluminium Pigmented Chlorinated Rubber Primer, Sealer DESCRIPTION High-build, aluminum pigmented chlorinated rubber primer/sealer PRINCIPAL CHARACTERISTICS • Anticorrosive primer/sealer • Excellent water resistance • Unsaponifiable • Resistant to well designed/controlled cathodic protection • Fast-drying • Can be applied at low temperatures, down to –10°C (14°F) • Tolerates a DFT up to 150 μm (6.0 mils) at overlaps without sagging • Compatible with antifoulings COLOR AND GLOSS LEVEL • Light and dark gray • Flat

Product Details:

SIGMA SAILADVANCE RX Low friction, self lubricating, linear self polishing antifouling based on hydrolysable binder composition

PRINCIPAL CHARACTERISTICS• Designed for all vessel types and speeds and particularly effective for slow steaming because of its engineered oilsbinder composition• Evolves in a linear polishing and consistent biocide release for predictable performance up to 90 months• Most suitable for mid to high operational ranges• Constant surface activity, limited leach layer build-up• Low friction properties from lubricating engineered oils surpressing turbulent flow• Extended idle days through the release effect of engineered oils creating a slippery surface• High volume solids for efficient application• Suitable for application at New Build and Dry Dockings• Based on PPG technologyCOLOR AND GLOSS LEVEL• Redbrown, brown, black• Flat

Additional Information:

• Packaging Details: SIGMA SAILADVANCE RX Low friction, self lubricating, linear self polishing antifouling based on hydrolysable binder composition PRINCIPAL CHARACTERISTICS • Designed for all vessel types and speeds and particularly effective for slow steaming because of its engineered oils binder composition • Evolves in a linear polishing and consistent biocide release for predictable performance up to 90 months • Most suitable for mid to high operational ranges • Constant surface activity, limited leach layer build-up • Low friction properties from lubricating engineered oils surpressing turbulent flow • Extended idle days through the release effect of engineered oils creating a slippery surface • High volume solids for efficient application • Suitable for application at New Build and Dry Dockings • Based on PPG technology COLOR AND GLOSS LEVEL • Redbrown, brown, black • Flat

Product Details:

SIGMARINE 48 General Purpose Gloss Paint Based on an Alkyd-Modified Resin
PRINCIPAL CHARACTERISTICS• Particularly suitable as a finish for boottop, topside, deck and deck equipment• A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention• Can be applied over most intact alkyd paints• This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions• Also available with non-skid material (supplied separately) for use on deck surfacesCOLOR AND GLOSS LEVEL• White and various other colors (see also SIGMACARE shade card)• Gloss

Additional Information:

• Packaging Details: SIGMARINE 48 General Purpose Gloss Paint Based on an Alkyd-Modified Resin PRINCIPAL CHARACTERISTICS • Particularly suitable as a finish for boottop, topside, deck and deck equipment • A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention • Can be applied over most intact alkyd paints • This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions • Also available with non-skid material (supplied separately) for use on deck surfaces COLOR AND GLOSS LEVEL • White and various other colors (see also SIGMACARE shade card) • Gloss

Product Details:

SIGMARINE 48 LF General Purpose Gloss Paint Based on an Alkyd-Modified Resin

PRINCIPAL CHARACTERISTICS• Particularly suitable as a finish for boottop, topside, deck and deck equipment• A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention• Can be applied over most intact alkyd paints• This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions• Also available with non-skid material (supplied separately) for use on deck surfacesCOLOR AND GLOSS LEVEL• White and various other colors (see also SIGMACARE shade card)• Gloss

Additional Information:

• Packaging Details: SIGMARINE 48 LF General Purpose Gloss Paint Based on an Alkyd-Modified Resin PRINCIPAL CHARACTERISTICS • Particularly suitable as a finish for boottop, topside, deck and deck equipment • A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention • Can be applied over most intact alkyd paints • This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions • Also available with non-skid material (supplied separately) for use on deck surfaces COLOR AND GLOSS LEVEL • White and various other colors (see also SIGMACARE shade card) • Gloss

Product Details:

SIGMA SAILADVANCE DX Linear Self Polishing Antifouling Based on Organic Hydrolysable Ploymer Binder
Low friction, linear self polishing antifouling based on organic hydrolysable polymer binder, designed for broad operationalrangesPRINCIPAL CHARACTERISTICS• Designed as the antifouling system suitable for a range of vessel activities• Self-polishing antifouling with good weathering properties for atmospheric resistance during vessel construction and inservice• Controlled polishing rate to give effective protection in accordance with the specified dry film thickness• Enhances self-smoothing capabilities to give optimal hull roughness reduction• Controls settlement of shell and weed fouling for prolonged periods, depending on sailing pattern and routes• Complies with IMO Antifouling Systems Convention• Developed based upon advanced silyl methacrylate resin technologyCOLOR AND GLOSS LEVEL• Redbrown, brown• Flat

Additional Information:

• Packaging Details: SIGMA SAILADVANCE DX Linear Self Polishing Antifouling Based on Organic Hydrolysable Ploymer Binder Low friction, linear self polishing antifouling based on organic hydrolysable polymer binder, designed for broad operational ranges PRINCIPAL CHARACTERISTICS • Designed as the antifouling system suitable for a range of vessel activities • Self-polishing antifouling with good weathering properties for atmospheric resistance during vessel construction and inservice • Controlled polishing rate to give effective protection in accordance with the specified dry film thickness • Enhances self-smoothing capabilities to give optimal hull roughness reduction • Controls settlement of shell and weed fouling for prolonged periods, depending on sailing pattern and routes • Complies with IMO Antifouling Systems Convention • Developed based upon advanced silyl methacrylate resin technology COLOR AND GLOSS LEVEL • Redbrown, brown • Flat

Product Details:

SIGMATHERM 175 Heat-Resistant Modified Alkyd Aluminium Finish
DESCRIPTIONHeat-resistant modified alkyd aluminum finishPRINCIPAL CHARACTERISTICS• Heat-resistant up to 175°C (350°F)• High-brilliancy• Spray application improves the appearance• A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heatCOLOR AND GLOSS LEVEL• Aluminum• Gloss

Additional Information:

• Packaging Details: SIGMATHERM 175 Heat-Resistant Modified Alkyd Aluminium Finish DESCRIPTION Heat-resistant modified alkyd aluminum finish PRINCIPAL CHARACTERISTICS • Heat-resistant up to 175°C (350°F) • High-brilliancy • Spray application improves the appearance • A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat COLOR AND GLOSS LEVEL • Aluminum • Gloss

Product Details:

AMERCOAT 138G Heavy duty Non-Skid Epoxy Coating
DESCRIPTIONHeavy duty non-skid epoxy coatingPRINCIPAL CHARACTERISTICS• Tough, abrasion resistant epoxy coating containing hard non-skid grit• Non-skid grit pre-dispersed in epoxy component• Qualified to Mil-PRF-24667, Types I and 2COLOR AND GLOSS LEVEL• Dark gray, black• Low sheenNote: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight

Additional Information:

• Packaging Details: AMERCOAT 138G Heavy duty Non-Skid Epoxy Coating DESCRIPTION Heavy duty non-skid epoxy coating PRINCIPAL CHARACTERISTICS • Tough, abrasion resistant epoxy coating containing hard non-skid grit • Non-skid grit pre-dispersed in epoxy component • Qualified to Mil-PRF-24667, Types I and 2 COLOR AND GLOSS LEVEL • Dark gray, black • Low sheen Note: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight

Product Details:

SIGMARINE 80 Finishing Coat Based on a Alkyd-Modified Petrolium Resin Pigmented With Aluminium
SIGMARINE 80 Finishing Coat Based on a Alkyd-Modified Petrolium Resin Pigmented With Aluminium
SIGMARINE 80 Finishing Coat Based on a Alkyd-Modified Petrolium Resin Pigmented With Aluminium

Additional Information:

• Packaging Details: SIGMARINE 80 Finishing Coat Based on a Alkyd-Modified Petrolium Resin Pigmented With Aluminium

Product Details:

SIGMAWELD 165 Moisture-Curing Zinc (Ethyl) Silicate Prefabrication Primer
PRINCIPAL CHARACTERISTICS• Suitable for automatic application on shot blasted steel plates• Fast drying properties• Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic ormanual welding)• Provides corrosion protection up to 9 months, when applied at a DFT of 13 μm (0.5 mil) (depending on exposureconditions and blasting profile)• Can be used as a first coat in various paint systems• Suitable for sea water immersion in combination with controlled cathodic protection systems• Excellent thermal stability minimizes heat damage during hot work procedures• No adherence of weldspatter at surrounding primed surface• Approved by Lloyd's Register of Shipping for use as a prefabrication primerCOLOR AND GLOSS LEVEL• Gray, reddish gray• Flat

Additional Information:

• Packaging Details: SIGMAWELD 165 Moisture-Curing Zinc (Ethyl) Silicate Prefabrication Primer PRINCIPAL CHARACTERISTICS • Suitable for automatic application on shot blasted steel plates • Fast drying properties • Good cutting and excellent welding properties, including MIG/MAG welding in various positions (either automatic or manual welding) • Provides corrosion protection up to 9 months, when applied at a DFT of 13 μm (0.5 mil) (depending on exposure conditions and blasting profile) • Can be used as a first coat in various paint systems • Suitable for sea water immersion in combination with controlled cathodic protection systems • Excellent thermal stability minimizes heat damage during hot work procedures • No adherence of weldspatter at surrounding primed surface • Approved by Lloyd's Register of Shipping for use as a prefabrication primer COLOR AND GLOSS LEVEL • Gray, reddish gray • Flat

Product Details:

SIGMA ECOFLEET 290 Iinear Polishing Antifouling Partuculary Suiltable for Deep Sea Vessels
PRINCIPAL CHARACTERISTICS• TBT-free self-polishing antifouling for new-building and maintenance• Controls settlement of shell and weed fouling for prolonged periods, depending on sailing pattern and routes• Controlled polishing rate to give effective protection in accordance with the specified film thickness and smoothing of thesurface• Complies with IMO Antifouling Systems ConventionCOLOR AND GLOSS LEVEL• Redbrown, brown, black• Flat

Additional Information:

• Packaging Details: SIGMA ECOFLEET 290 Iinear Polishing Antifouling Partuculary Suiltable for Deep Sea Vessels PRINCIPAL CHARACTERISTICS • TBT-free self-polishing antifouling for new-building and maintenance • Controls settlement of shell and weed fouling for prolonged periods, depending on sailing pattern and routes • Controlled polishing rate to give effective protection in accordance with the specified film thickness and smoothing of the surface • Complies with IMO Antifouling Systems Convention COLOR AND GLOSS LEVEL • Redbrown, brown, black • Flat

Product Details:

SIGMASHIELD 880 High Build Polyamine Adduct-ACured Epoxy Coating
PRINCIPAL CHARACTERISTICS• Primarily designed for use in offshore splash zone maintenance• Outstanding sea water resistance• Excellent corrosion resistance• Surface tolerant and abrasion resistant• Continues to cure when immersed in water• Long-term protection in a single-coat application• Resistant to well designed cathodic protection• Suitable for application on exterior of buried pipes• Suitable on wet blast or ultra high pressure water (UHPWW) cleaned substrates (damp or dry)• Suitable primer for SIGMAGLIDE fouling release systemCOLOR AND GLOSS LEVEL• Offwhite, yellow and black (other colors available on request)• GlossNote: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight. Light colors are prone to ambering tosome extent in interior or exterior exposures

Additional Information:

• Packaging Details: SIGMASHIELD 880 High Build Polyamine Adduct-ACured Epoxy Coating PRINCIPAL CHARACTERISTICS • Primarily designed for use in offshore splash zone maintenance • Outstanding sea water resistance • Excellent corrosion resistance • Surface tolerant and abrasion resistant • Continues to cure when immersed in water • Long-term protection in a single-coat application • Resistant to well designed cathodic protection • Suitable for application on exterior of buried pipes • Suitable on wet blast or ultra high pressure water (UHPWW) cleaned substrates (damp or dry) • Suitable primer for SIGMAGLIDE fouling release system COLOR AND GLOSS LEVEL • Offwhite, yellow and black (other colors available on request) • Gloss Note: Epoxy coatings will characteristically chalk and fade upon exposure to sunlight. Light colors are prone to ambering to some extent in interior or exterior exposures

Product Details:

Two-component, polyamide high-build epoxy primer/buildcoat, containing zinc phosphate. We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Two-component, polyamide high-build epoxy primer/buildcoat, containing zinc phosphate

Product Details:

SIGMATHERM 230 Two-Component, High-Build, Heat-Resistant Epoxy Phenol Novolac Coating
PRINCIPAL CHARACTERISTICS• Provides a corrosion resistant barrier on carbon steel and stainless steel under thermal insulation• Suitable as heat resistant system under insulation up to 230°C (450°F)• Suitable for use in cryogenic conditions• Passes cryogenic cyclic test down to -196°C (-321°F)• Excellent protection and resistance against corrosion and severe chemicals• Excellent resistance to thermal shock during rapid wet & dry cycling• Meets CS-1, 3 and 4 for carbon steels under thermal insulation according to NACE SP0198-10• Meets SS-1, 2 and 3 for stainless steels under thermal insulation according to NACE SP0198-10• No post-curing is required to obtain mechanical strength• Can be applied on hot substrate up to 150°C (302°F), please contact your PPG representative for detailCOLOR AND GLOSS LEVEL• Pink, gray• EggshellNote: Epoxy coatings will chalk and fade upon exposure to sunlight, elevated temperatures, or chemical exposure.Discoloration and normal chalking does not impact performance. Light colors will darken over time. Some batch-to-batchvariation in color is to be expected. Color matches are approximate.

Additional Information:

• Packaging Details: SIGMATHERM 230 Two-Component, High-Build, Heat-Resistant Epoxy Phenol Novolac Coating PRINCIPAL CHARACTERISTICS • Provides a corrosion resistant barrier on carbon steel and stainless steel under thermal insulation • Suitable as heat resistant system under insulation up to 230°C (450°F) • Suitable for use in cryogenic conditions • Passes cryogenic cyclic test down to -196°C (-321°F) • Excellent protection and resistance against corrosion and severe chemicals • Excellent resistance to thermal shock during rapid wet & dry cycling • Meets CS-1, 3 and 4 for carbon steels under thermal insulation according to NACE SP0198-10 • Meets SS-1, 2 and 3 for stainless steels under thermal insulation according to NACE SP0198-10 • No post-curing is required to obtain mechanical strength • Can be applied on hot substrate up to 150°C (302°F), please contact your PPG representative for detail COLOR AND GLOSS LEVEL • Pink, gray • Eggshell Note: Epoxy coatings will chalk and fade upon exposure to sunlight, elevated temperatures, or chemical exposure. Discoloration and normal chalking does not impact performance. Light colors will darken over time. Some batch-to-batch variation in color is to be expected. Color matches are approximate.

Product Details:

SIGMASHIELD 460 Two-component, high solids glass flake reinforced polyamine adduct epoxy coating
PRINCIPAL CHARACTERISTICS• Excellent abrasion and impact resistance• Suitable for use on ice-going vessels• Excellent resistance to corrosion• Long-term protection at areas subject to heavy wear and tear• Resistant to splash and spillage of a wide range of chemicals• Very low water permeability, due to glass flake barrier

Additional Information:

• Packaging Details: SIGMASHIELD 460 Two-component, high solids glass flake reinforced polyamine adduct epoxy coating PRINCIPAL CHARACTERISTICS • Excellent abrasion and impact resistance • Suitable for use on ice-going vessels • Excellent resistance to corrosion • Long-term protection at areas subject to heavy wear and tear • Resistant to splash and spillage of a wide range of chemicals • Very low water permeability, due to glass flake barrier

Product Details:

Additional Information:

• Packaging Details: SIGMACOVER 300 Two-Component, High-Build, Polyamine Adduct-Cured, Coal Tar Epoxy Coating

Product Details:

Two-component, high-build, polyamide-cured recoatable epoxy coating. We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr only Two-component, high-build, polyamide-cured recoatable epoxy coating

Product Details:

One-component, heat-resistant, moisture-curing silicone aluminum

Additional Information:

• Packaging Details: Available Pack Size 20 ltr Only One-component, heat-resistant, moisture-curing silicone aluminum

Product Details:

SIGMACOVER™ 522  Epoxy Primer Sealer Coating
Two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating
PRINCIPAL CHARACTERISTICS• Excellent adhesion to, and sealing of, weathered-, cleaned-, zinc-rich primers and metal-sprayed steel• Good adhesion to properly pretreated galvanized steel• Can be used in systems for atmospheric or water-immersed exposure conditions• Good resistance to industrial- or chemical-contaminated atmospheric exposure conditions• Good abrasion and impact resistance• Pass cryogenic cyclic test from -196°C (-321°F) to 140°C (284°F)• Resistant to temperatures up to 200°C (390°F) in dry atmospheric exposure conditions

Additional Information:

• Packaging Details: SIGMACOVER™ 522 Epoxy Primer Sealer Coating Two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating PRINCIPAL CHARACTERISTICS • Excellent adhesion to, and sealing of, weathered-, cleaned-, zinc-rich primers and metal-sprayed steel • Good adhesion to properly pretreated galvanized steel • Can be used in systems for atmospheric or water-immersed exposure conditions • Good resistance to industrial- or chemical-contaminated atmospheric exposure conditions • Good abrasion and impact resistance • Pass cryogenic cyclic test from -196°C (-321°F) to 140°C (284°F) • Resistant to temperatures up to 200°C (390°F) in dry atmospheric exposure conditions

Product Details:

The ultimate solution for in-shop application

The PPG SIGMAFAST 278 high-solids zinc phosphate epoxy primer and build coat is a proven epoxy technology that combines 80% of volume solids with excellent fast-drying properties in one product. It is ideal for in-shop applications. Our unique coating is the only product on the market that combines 80% volume solids with excellent fast drying properties.

This innovative product, part of the PPG brand, is the latest coating development based on our long history in epoxy chemistry. This coating solution improves the speed of in-shop applications while also providing compliance to all VOC legislation.

PPG SIGMAFAST 278 delivers improved in-shop productivity

PPG SIGMAFAST 278 is designed for shop and field applications. With its unique film build capabilities, dry time, recoat window and volume solids, it has proven value to owners and applicators.

SIGMAFAST 278 is a two-component, zinc phosphate epoxy primer and build coat that offers a unique range of features and benefits for in-shop steel fabrication:

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only The ultimate solution for in-shop application The PPG SIGMAFAST 278 high-solids zinc phosphate epoxy primer and build coat is a proven epoxy technology that combines 80% of volume solids with excellent fast-drying properties in one product. It is ideal for in-shop applications. Our unique coating is the only product on the market that combines 80% volume solids with excellent fast drying properties. This innovative product, part of the PPG brand, is the latest coating development based on our long history in epoxy chemistry. This coating solution improves the speed of in-shop applications while also providing compliance to all VOC legislation. PPG SIGMAFAST 278 delivers improved in-shop productivity PPG SIGMAFAST 278 is designed for shop and field applications. With its unique film build capabilities, dry time, recoat window and volume solids, it has proven value to owners and applicators. SIGMAFAST 278 is a two-component, zinc phosphate epoxy primer and build coat that offers a unique range of features and benefits for in-shop steel fabrication:

Product Details:

Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating. We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only DESCRIPTION Two-component, surface-tolerant, high-build, polyamide-cured epoxy primer/coating

Product Details:

SIGMAZINC™ 158 Zinc (ethyl) Silicate Primer
Two-component, moisture-curing zinc (ethyl) silicate primer
PRINCIPAL CHARACTERISTICS• Certificate for ASTM A-490 class 'B' for slip coefficient• Complies with the compositional requirements of SSPC-Paint 20, Level 2• Anticorrosive primer for structural steel• Suitable as a system primer in various paint systems based on unsaponifiable binders• Galvanic action eliminates sub-film corrosion• Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposureconditions• When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F)• Good low-temperature curing• Good impact and abrasion resistance• Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr SIGMAZINC™ 158 Zinc (ethyl) Silicate Primer Two-component, moisture-curing zinc (ethyl) silicate primer PRINCIPAL CHARACTERISTICS • Certificate for ASTM A-490 class 'B' for slip coefficient • Complies with the compositional requirements of SSPC-Paint 20, Level 2 • Anticorrosive primer for structural steel • Suitable as a system primer in various paint systems based on unsaponifiable binders • Galvanic action eliminates sub-film corrosion • Can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), under normal atmospheric exposure conditions • When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F) • Good low-temperature curing • Good impact and abrasion resistance • Must not be exposed to alkaline (more than pH 9) or acidic (less than pH 5.5) liquids

Product Details:

Heat-resistant silicone/acrylic finish. We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only Heat-resistant silicone/acrylic finish

Product Details:

Two-component, high solids, high-build, polyamide cured epoxy coating. We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr only Two-component, high solids, high-build, polyamide cured epoxy coating

Product Details:

SIGMACOVER 555 Polyamide Cured Epoxy Anticorrosive Tiecoat
Two-component, polyamide-cured epoxy anticorrosive tiecoatPRINCIPAL CHARACTERISTICS• Final coat in epoxy underwater anticorrosive systems• Excellent water resistance• Epoxy anticorrosive with excellent adhesion for antifoulings• Good abrasion and impact resistanceCOLOR AND GLOSS LEVEL• Black, gray• Eggshell

Additional Information:

• Packaging Details: SIGMACOVER 555 Polyamide Cured Epoxy Anticorrosive Tiecoat Two-component, polyamide-cured epoxy anticorrosive tiecoat PRINCIPAL CHARACTERISTICS • Final coat in epoxy underwater anticorrosive systems • Excellent water resistance • Epoxy anticorrosive with excellent adhesion for antifoulings • Good abrasion and impact resistance COLOR AND GLOSS LEVEL • Black, gray • Eggshell

Product Details:

AMERCOAT 138 L Epoxy Non-Skid
As a weldable preconstruction primer in automated shopprimingplants over abrasive blast cleaned steel: protects againstweathering on flat steel plates and structural steel shapes. A singlecoat applied at 20 to 25 μm protects against weathering duringhandling and fabricating. Steel primed with Amercoat 138 can bereadily cut and welded by automatic and manual methods. Afterfabrication, overcoat with suitable topcoat systems.INDUSTRIAL - Structural steel, machinery, pipes and tank exteriorsin paper mills, oil refineries, power plants, chemical process andwaste treatment plants.MARINE - Decks, hulls, bottoms and superstructures of ships,barges and workboats. Piers, offshore platforms and relatedstructures

Additional Information:

• Packaging Details: AMERCOAT 138 L Epoxy Non-Skid As a weldable preconstruction primer in automated shoppriming plants over abrasive blast cleaned steel: protects against weathering on flat steel plates and structural steel shapes. A single coat applied at 20 to 25 μm protects against weathering during handling and fabricating. Steel primed with Amercoat 138 can be readily cut and welded by automatic and manual methods. After fabrication, overcoat with suitable topcoat systems. INDUSTRIAL - Structural steel, machinery, pipes and tank exteriors in paper mills, oil refineries, power plants, chemical process and waste treatment plants. MARINE - Decks, hulls, bottoms and superstructures of ships, barges and workboats. Piers, offshore platforms and related structures

Product Details:

Two-component, high solids, zinc phosphate epoxy primer and buildcoat

Additional Information:

• Packaging Details: Available Pack Size 20 Ltr Only Two-component, high solids, zinc phosphate epoxy primer and buildcoat