Good Morning Paints Private Limited

ShaliPoxy CTE 303 2K Anti-corrosive  Protective Flexible Coal Tar Epoxy Coating

ShaliPoxy® CTE 303 is a two component, high build, coal tar epoxy protective coating for steel and concrete giving 300 micron in single coat on wet-on-wet basis.ShaliPoxy® CTE 303 has excellent corrosion / chemical / abrasion / scratch resistance and is used as direct to metal (DTM) application, without any requirement of primer.It conforms to AWWA C-210 : 2015 SSPC Paint 16 and Corp of Engineers C200 / C200a.

Paramount ADHINS Fire Retardant
Intumescent paint optimized forup to120 minutes of re resistance tostructural steelwork and other substrates
Fire-Resistant Paint is our revolutionarywater-based intumescent paint for fire and heat protectionthat can be applied to most building materials. Itprovides up to 2 hours of fire rating with a minimumnumber of coats on structural steel including galvanizedsteel, mild steel, stainless steel, ductwork & and electricalcables, drywall, internal metal, sheet metal, concretesurfaces, sheetrock, composite panels, and interior wood.It is approved for interior as well as general-purposeapplications and is excellent for fire-rated duct works likeVentilation Fire Ductwork, Smoke Exhaust Ductwork, CarPark Ventilation Ductwork, Kitchen Exhaust Ductwork, andPressurization Ductwork.

Water Based Fire Retardant Paint
ProtonPaints Water Based Fire Retardant Paintconsists of a non-flammable base, special pigmentsand additives unlike normal paints which are based onflammable base. The dried film gives good protectionagainst spread of fire.This product can be used on wood, metal, concrete. ThisProduct has a varied application in industrial &commercial establishments. Some important areas ofapplication are electrical cabins, kitchens, lifts studios,doors, railway compartments, server room etc.

KemThane 411 High Performance Polyurethane Finish (Polyurethane Finish Top Coat)
PRODUCT DESCRIPTIONKemThane 411 is a two component air drying, highperformance, acrylic aliphatic polyurethane finish usedin painting scheme requiring exterior durability. It isspecially designed polyurethane finish to suit heavyduty application.INTENDED USESIt is used in Steel Structure, Power Plants, Refineries,Offshore Structure, Petrochemicals, Bridges, Dock,Equipments, Machinery, Storage tanks & Pipelines,etc.

Solvent Based Fire Retardant Paint
Prabhat Paints Solvent Based Fire Retardant Paintconsists of a non-flammable resin, special fireretardant pigments and fire retardant additivesunlike normal paints which are based onflammable raw material. The dried film givesprotection against spread of fire.

Water Based Fire Retardant Paint -100 (For Wall)

KemFire 209 is a Two component Solvent based high solid, intumescent coating tested to access fire protection performance on structural steel work. INTENDED USES To provide upto 2 hour fire protection on “I” section beams, columns & hallow sections. KemFire 209 is suitable for application in steel fabrication shop & can be used over recommended priming systems.

STARCOAT-CRC is a single component, highbuild, chlorosulphonated rubber based, suitablyplasticized self priming and top coat of various metals, wood and concrete. It is highly corrosion resistant, fast drying self primer and fire retardant coating. This product has excellent adhesion properties with good impact resistance. It can beused as a part of a system comprising a primer or top coat in areas exposed to atmospheric corrosion.These properties allow STARCOAT- CRC to be used in a wide variety of industrial applications.

Anti-fouling paint is a special coating that is applied to the hull and propellers of a marine craft

ShaliPoxy CTE 103 Anti-corrosive  Protective Flexible Coal Tar Epoxy Coating

Flamebar BW11 Fire Rated Ductwork Bluetop
FLAMEBAR BW11FIRE RATED DUCTWORKFire rated duct providing up to 4 hours fire resistancewhen tested to BS 476 Part 24 and ISO 6944FLAMEBAR BW11 SYSTEM
Flamebar BW11 fire duct is constructed from galvanisedsheet steel manufactured to either DW144 or SMACNAstandard. It is then degreased and sprayed with FlamebarBW11, which is a specially formulated water based ablativecoating.Flamebar BW11 contains selected mineral fillers in a lowpermeability elastomeric binder to a thickness of nominal0.7mm to give a light weight finish product which, has beensuccessfully tested for international use under CellulosicFire Conditions in excess of 4 hours duration. The ductworkis produced in sections and is assembled on site utilisingtested Flamebar sealant and gasket.

Terrace Waterproofing Service is an economical way to protect it from an access to rainwater, cement or polymer is mixed together

Water Based Fire Retardant Primer
Proton Paints Water Based Fire Retardant Primerconsists of a non-flammable base, special pigmentsand additives unlike normal primer which are based onflammable base. This primer is intended to use as abase coat for Water Based Fire Retardant Paint. Both incombination provides good fire retardant properties

FIREX EC 43 Fire Retardant Paint for Cable
intumescent fire protection coating
Water immersion /weather resistant intumescent fire protection coating, for combustibleelectrical & communication cables
Long runs of unprotected, PVC or plastic rubber sheathed combustible cables, usually supportedby cable trays, are prone to rapid fire spread /generation of toxic smoke /acid gases and can thuscause excessive damage to men & materials.

Hitech Block Joining Mortar
This mortar replaces conventional jointing sand-cement mortar of 18-25 mm thickness with highly versatile 3 mm thickness layer and gives instant bonding

LuminX Cool Roof Solar Reflective Coating High SRI Value Elastomeric
SOLAR HEAT REFLECTIVE Cool Roof CoatingSINGLE COMPONENT, ACRYLIC BASED ELASTOMERIC, SOLAR HEATREFLECTIVE COATING, HIGH SRI PAINT FOR COOL ROOF COATING WITHADVANCED NANOTECHNOLOGY REFLECTIVE PROPERTY COATING
LuminX® is a water-based high solid acrylic cross-linked elastomeric Cool roof coating.Its innovative advanced nanotechnology-based formulation offers high solar reflectivityand thermal emittance which significantly reduces the roof temperature even in theextreme weather conditions. Its high SRI value ensures that it reflects the maximumamount of heat. Its unique formulation forms a strong chemical bond with the surfaceand offers complete protection with a promise to keep the building cool.
Features / Advantages● Lower Indoor Temperature ranging from 2°C to 15°C● Reduced roof temperatureso For RCC/Asbestos roofs - Upto 30 °Co GI/ Metal roof substrate -Up to 40°C● High solar reflectance index (SRI) indicates high degree of cooling effect● Ultra violet rays and weather resistant● Save on electricity bills by decreasing air conditioning needs.● Improve indoor work comforts and worker productivity.● Extends the life of a roof● Save on roof maintenance cost● Increase cooling efficiency of buildings● Crack-bridging property● Algae and fungi resistant● Simple and fast application● Help in Reduction of Roofing Wastes in Landfills● Decrease CO2 emission● Reduce “Urban Heat Island” effects● Eco friendly

Hitech Ready Mix Plaster
Hi-tech Ready Mix Plaster offers high quality strong and durable

GYPSUM PLASTER ONE COAT

The distinguished advantage of the BUILDON Gypsum Plaster-one coat is that it is made out of the highest grade of Gypsum being pure white in colour and having a hardness of about 40%, which is more than any other Gypsum Plaster available in the Indian market. This Gypsum plaster can be easily applied directly on all surfaces, we do not need to sand cement plaster the walls. The coverage in a 25Kg bag is 20 Sq. Ft. with a thickness of 12mm. The fineness of 250 mesh and purity of over 90% gives the best atomic bond and an absolute mirror finish.

GYPSUM PLASTER ONE COAT

The distinguished advantage of the BUILDON Gypsum Plaster-one coat is that it is made out of the highest grade of Gypsum being pure white in colour and having a hardness of about 40%, which is more than any other Gypsum Plaster available in the Indian market. This Gypsum plaster can be easily applied directly on all surfaces, we do not need to sand cement plaster the walls. The coverage in a 25Kg bag is 20 Sq. Ft. with a thickness of 12mm. The fineness of 250 mesh and purity of over 90% gives the best atomic bond and an absolute mirror finish.

BONDIT-151 PLASTERBOND

BONDIT PLASTER BOND+

 

BUILDON BONDIT PLASTER BOND + is high-performance bonding agent for gypsum and sand cement plaster on concrete blocks/rcc surfaces. Further it has waterproofing properties and hence it prevents leakages from the cracks in the plaster.

BONDIT PLASTER BOND+ is a plaster Bonder that is used to adhere fresh plaster to any interior surface that is structurally sound. When it is dry, it produces a layer that moistens when plaster is poured, resulting in a solid as well as a long-lasting bonding. In addition to this, BONDIT PLASTER BOND+ also allows for high performance bonding of one-coat finish plaster or two and three coat work to walls, beams, concrete ceilings, columns and other solid surface structures.

KemOxy 301 Epoxy Zinc Chromate Primer (Epoxy Primer)
PRODUCT DESCRIPTIONKemOxy 301 is a two-pack epoxy primer based on Zinc Chromate pigment . It is specially designed as abase coat primer which can be over coated with epoxy/polyurethane finish in protective coating systemINTENDED USESIt is general purpose anticorrosive primer in protective coating system. Suitable for structural steel piping inMarine & corrosive environment such as Power Plants, Refineries, Offshore Structure, Petrochemicals,Bridges, Dock installation, Equipments, Machinery, Storage Tank.

BUILDON P-20 Ready Mix PlasterBuildonP-20 is a Premixed sand cement plaster. It is specially formulated for exterior and interior plastering work to give a hard, smooth better shrinkage control base coat. Due to its high content of additives and use of precisely graded fillers , a homogeneous good adhesion and high workability is obtained when mixed with water. BuildonP-20 Premixed Sand Cement Plaster can be applied manually by hand or by using spray machines.