Jotun Paints Ltd.

Product Details:

Safeguard Universal ES
This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat betweenepoxy primers and antifouling systems. Can be used as tie coat / holding primer for a wide range of topcoats. Tobe used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium,carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures.

Additional Information:

• Packaging Details: Availble Pack Size 20 Ltr Only Safeguard Universal ES This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems. Can be used as tie coat / holding primer for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures.

Product Details:

Tankguard 412
This is a two component solvent free polyamine cured epoxy coating. It is a general purpose tank lining withgood chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersedenvironments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concretesubstrates.

Additional Information:

• Packaging Details: 20 Ltr PackSize Only Tankguard 412 This is a two component solvent free polyamine cured epoxy coating. It is a general purpose tank lining with good chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.

Product Details:

Jotaguard 82
This is a two component polyamine cured epoxy coating. It is a high solids, high build product. It is a surfacetolerant product. Designed as a replacement for coal tar epoxy products. Can be used as primer, mid coat, finishcoat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbonsteel substrates. It can be applied at sub zero surface temperatures.

Additional Information:

• Packaging Details: 20 Ltr Packs Size Only This is a two component polyamine cured epoxy coating. It is a high solids, high build product. It is a surface tolerant product. Designed as a replacement for coal tar epoxy products. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. It can be applied at sub zero surface temperatures.

Product Details:

Safeguard Universal ES
This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat betweenepoxy primers and antifouling systems. Can be used as tie coat / holding primer for a wide range of topcoats. Tobe used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium,carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures

Additional Information:

• Packaging Details: 20 ltr Packs Size Only Safeguard Universal ES This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems. Can be used as tie coat / holding primer for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures

Product Details:

Penguard Midcoat MIO
This is a two component polyamide cured epoxy coating. It is a micaceous iron oxide (MIO) pigmented, highsolids, high build product. Designed as a mid coat in systems for new construction in atmospheric environments.Suitable in approved coating systems.

Additional Information:

• Packaging Details: 20 Packs Size Only Penguard Midcoat MIO This is a two component polyamide cured epoxy coating. It is a micaceous iron oxide (MIO) pigmented, high solids, high build product. Designed as a mid coat in systems for new construction in atmospheric environments. Suitable in approved coating systems.

Product Details:

Jotatemp 1000 (Inorganic Ceramic Copolymer)
This is a three component titanium catalyzed inorganic ceramic copolymer based coating, which cures inambient conditions. It complies to the generic type inert multipolymeric matrix coating. Designed as a heatresistant coating, and it is resistant to low temperatures down to -196 °C and high temperatures up to 1000 °Ccontinuously, where substrates allow. Can be used as primer or finish coat in atmospheric environments.Suitable for properly prepared carbon steel and ceramic substrates. It can be applied on hot substrates up to250 °C. Please refer to the application guide for more detailed information. It will offer proper corrosionprotection at ambient conditions during construction and shut-down periods. The product passes the standardtests used for qualifying coatings preventing corrosion under insulation (CUI).

Additional Information:

• Packaging Details: Jotatemp 1000 (Inorganic Ceramic Copolymer) This is a three component titanium catalyzed inorganic ceramic copolymer based coating, which cures in ambient conditions. It complies to the generic type inert multipolymeric matrix coating. Designed as a heat resistant coating, and it is resistant to low temperatures down to -196 °C and high temperatures up to 1000 °C continuously, where substrates allow. Can be used as primer or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and ceramic substrates. It can be applied on hot substrates up to 250 °C. Please refer to the application guide for more detailed information. It will offer proper corrosion protection at ambient conditions during construction and shut-down periods. The product passes the standard tests used for qualifying coatings preventing corrosion under insulation (CUI).

Product Details:

Marathon 500 polyamine cured epoxy coating
This is a two component polyamine cured epoxy coating. It is a surface tolerant, high solids, high build product.Will continue to cure when immersed in water. The product has high abrasion resistance. Suitable forenvironments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, midcoat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properlyprepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.

Additional Information:

• Packaging Details: Marathon 500 polyamine cured epoxy coating This is a two component polyamine cured epoxy coating. It is a surface tolerant, high solids, high build product. Will continue to cure when immersed in water. The product has high abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.

Product Details:

Jotatemp 1000 Ceramic
This is a two component titanium catalyzed inorganic ceramic copolymer based coating. It complies to thegeneric type Inert Multi Polymeric Matrix Coating. Designed as a heat resistant coating, and it is resistant to lowtemperatures down to -196 °C and high temperatures up to 1000 °C continuously, where substrates allow. Canbe used as primer or finish coat in atmospheric environments. Suitable for properly prepared carbon steel,stainless steel and ceramic substrates. It can be applied on hot substrates up to 250 °C.The product passes the standard tests used for qualifying coatings preventing corrosion under insulation (CUI).It will offer proper corrosion protection at ambient conditions during construction and shut-down periods.

Additional Information:

• Packaging Details: Jotatemp 1000 Ceramic This is a two component titanium catalyzed inorganic ceramic copolymer based coating. It complies to the generic type Inert Multi Polymeric Matrix Coating. Designed as a heat resistant coating, and it is resistant to low temperatures down to -196 °C and high temperatures up to 1000 °C continuously, where substrates allow. Can be used as primer or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel and ceramic substrates. It can be applied on hot substrates up to 250 °C. The product passes the standard tests used for qualifying coatings preventing corrosion under insulation (CUI). It will offer proper corrosion protection at ambient conditions during construction and shut-down periods.

Product Details:

Hardtop Clear polyurethane coat
This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish withexcellent gloss retention. It has good chemical resistance. To be used as topcoat in atmospheric environments.

Additional Information:

• Packaging Details: Hardtop Clear polyurethane coat This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with excellent gloss retention. It has good chemical resistance. To be used as topcoat in atmospheric environments.

Product Details:

Chemflake Special glass flake reinforced vinyl ester coating
This is a glass flake reinforced vinyl ester coating. It is an ultra high build, extremely chemical resistant and fastcuring barrier coating. Can be used as primer, mid coat or finish coat in atmospheric and immersedenvironments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates.

Additional Information:

• Packaging Details: Chemflake Special glass flake reinforced vinyl ester coating This is a glass flake reinforced vinyl ester coating. It is an ultra high build, extremely chemical resistant and fast curing barrier coating. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates.

Product Details:

This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a high build, allpurpose coating for new construction. Can be used as primer, mid coat, finish coat or as single coat system inatmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel,aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.

Additional Information:

• Packaging Details: Availble Pack Size 20 Ltr Only This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a high build, all purpose coating for new construction. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.

Product Details:

Jotaprime Mastic
Jotaprime Mastic is a two-pack, surface tolerant epoxy mastic coating.
Recommended useAnticorrosive primer for steel structure above water. Jotaprime Mastic is suitable for on-board maintenance where blastcleaning may not be possible and extended durability is not required.

Additional Information:

• Packaging Details: 20 Ltr Pack Size Only Jotaprime Mastic Jotaprime Mastic is a two-pack, surface tolerant epoxy mastic coating. Recommended use Anticorrosive primer for steel structure above water. Jotaprime Mastic is suitable for on-board maintenance where blast cleaning may not be possible and extended durability is not required.

Product Details:

Hardtop XP Polyurethane Coat
This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with verygood gloss retention. It is a high solids product. The product has good application properties with low dry spray.To be used as topcoat in atmospheric environments.

Additional Information:

• Packaging Details: 20 Ltr Packs Size Only Hardtop XP Polyurethane Coat This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very good gloss retention. It is a high solids product. The product has good application properties with low dry spray. To be used as topcoat in atmospheric environments.

Product Details:

Penguard Primer

This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a primer for newconstruction. Can be used as primer as a part of a complete system in atmospheric and immersed environments.Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primedsteel and thermally sprayed zinc substrates.

Additional Information:

• Packaging Details: 20 Ltr Packs Size only Penguard Primer This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a primer for new construction. Can be used as primer as a part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.

Product Details:

Jotapipe AC 1003
This product is a fusion-bonded epoxy coating designed for use as a primer in multi-layer polyolefin systems. Theproduct exhibits a wide application window.
Operating conditionsThis product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, productperformance including maximum operating temperature can depend on plant application, pipe configuration, coatingsystem and local field conditions.

Additional Information:

• Packaging Details: Jotapipe AC 1003 This product is a fusion-bonded epoxy coating designed for use as a primer in multi-layer polyolefin systems. The product exhibits a wide application window. Operating conditions This product is suitable for pipelines operating at continuous temperatures up to 98 °C (208 °F). However, product performance including maximum operating temperature can depend on plant application, pipe configuration, coating system and local field conditions.

Product Details:

Solvalitt (silicone acrylic coating. It is heat resistant up to 600 °C.)
This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 °C. Can be usedas primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel,galvanised steel, stainless steel and aluminium substrates
Typical useOther variants availableSolvalitt AluProtective:Designed as a heat resistant coating. Suitable for insulated and non insulated surfaces. Recommended as finishcoat for insulated surfaces, in systems with suitable primers.Refer to separate TDS for each variant.

Additional Information:

• Packaging Details: Solvalitt (silicone acrylic coating. It is heat resistant up to 600 °C.) This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 °C. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates Typical use Other variants available Solvalitt Alu Protective: Designed as a heat resistant coating. Suitable for insulated and non insulated surfaces. Recommended as finish coat for insulated surfaces, in systems with suitable primers. Refer to separate TDS for each variant.

Product Details:

Penguard Clear Sealer
This is a two component transparent polyamide cured high molecular weight epoxy sealer coating. It hasexcellent penetrating properties and is designed as a sealer coat for concrete surfaces. Can be used as primer orfinish coat in a complete system in atmospheric environments.

Additional Information:

• Packaging Details: Penguard Clear Sealer This is a two component transparent polyamide cured high molecular weight epoxy sealer coating. It has excellent penetrating properties and is designed as a sealer coat for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.

Product Details:

Tankguard 412
This is a two component solvent free polyamine cured epoxy coating. It is a general purpose tank lining withgood chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersedenvironments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concretesubstrates.

Additional Information:

• Packaging Details: Tankguard 412 This is a two component solvent free polyamine cured epoxy coating. It is a general purpose tank lining with good chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.

Product Details:

Jota Armour
This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an anti-skidcoating. Suitable on metallic substrates coated with approved primers and on concrete coated with suitablesealer.

Additional Information:

• Packaging Details: Jota Armour This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an anti-skid coating. Suitable on metallic substrates coated with approved primers and on concrete coated with suitable sealer.

Product Details:

Tankguard Storage (novolac epoxy coating)
This is a two component polyamine cured phenolic/novolac epoxy coating. It is a specially designed tank liningwith excellent chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersedenvironments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concretesubstrates.

Additional Information:

• Packaging Details: Tankguard Storage (novolac epoxy coating) This is a two component polyamine cured phenolic/novolac epoxy coating. It is a specially designed tank lining with excellent chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.