Hempel Paints India Pvt. Ltd.

Product Details:

Hempaprime Multi 500 fast drying, high solids epoxy paint
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. Itprovides hard wearing and long lasting barrier protection in coatingsystems for severe corrosive environments. The product meets therequirements of ISO 12944 Part 5, 2019 when used as part of apredefined paint system.

Additional Information:

• Packaging Details: 20 Ltr Only Hempaprime Multi 500 fast drying, high solids epoxy paint Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. The product meets the requirements of ISO 12944 Part 5, 2019 when used as part of a predefined paint system.

Product Details:

Hempathane HS 55610 glossy polyurethane topcoat
Hempathane HS 55610 is a glossy polyurethane topcoat, cured withaliphatic isocyanate. The product has good gloss and colour retentionand contains zinc phosphate.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds

Additional Information:

• Packaging Details: 20 Ltr Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds

Product Details:

Hempadur 15570
DescriptionHempadur 15570 is a two component, polyamide-adduct cured epoxypaint, which cures to a strong and highly corrosion resistant coating,at temperatures down to -10°C/14°F. The Micaceous Iron Oxidepigmented reddish grey 12430 shade is also well suited for applicationunder humid conditions, on damp steel surfaces, and may be appliedon moist surfaces. The greyish yellow 21780 and the grey 11320shades contains zinc phosphate.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds: subcategory j.Recommended useAs a maintenance and repair primer, intermediate, and/or finishingcoat in Hempadur systems in severely corrosive environment. As afinishing coat where a cosmetic appearance is of less importance.As a low temperature curing epoxy primer, intermediate, and/orfinishing coat in paint systems according to specification. Well suitedas a (blast) primer in epoxy systems.Mist coat on Galvosil.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Hempadur 15570 Description Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F. The Micaceous Iron Oxide pigmented reddish grey 12430 shade is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces. The greyish yellow 21780 and the grey 11320 shades contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j. Recommended use As a maintenance and repair primer, intermediate, and/or finishing coat in Hempadur systems in severely corrosive environment. As a finishing coat where a cosmetic appearance is of less importance. As a low temperature curing epoxy primer, intermediate, and/or finishing coat in paint systems according to specification. Well suited as a (blast) primer in epoxy systems. Mist coat on Galvosil.

Product Details:

HEMPADUR 85671
HEMPADUR 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating withvery good adhesion and high temperature, water and chemical resistance.As an interior lining in tanks, pipelines etc. for hot water, brine, crude oil, potable water and a variety ofchemicals according to resistance list.External coating for the protection of insulated (CUI) and uninsulated process pipework and vesselsincluding cryogenic conditions.Dry service temperatures: Minimum: -196°C/-320°F ; Maximum: 205°C/400°FFor temperatures above 160°C/320°F - Consult the separate APPLICATION INSTRUCTIONS.In water (maximum gradient 15°C/27°F): 95°C/203°FPart of Group Assortment. Local availability subject to confirmation.In accordance with ARAMCO''s specification APCS 2A, 2B and 2C.Conforms to Norsok M-501, system no. 3C, 3D, 3E and 3F.Approved by Water Research Centre (WRAS), Great Britain, for potable water up to 23°C/73°F.Complies with Section 175.300 of the Code of Federal Regulations Title 21 – Liquid and Dry Foodstuff.Consult Hempel for details.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only HEMPADUR 85671 HEMPADUR 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance. As an interior lining in tanks, pipelines etc. for hot water, brine, crude oil, potable water and a variety of chemicals according to resistance list. External coating for the protection of insulated (CUI) and uninsulated process pipework and vessels including cryogenic conditions. Dry service temperatures: Minimum: -196°C/-320°F ; Maximum: 205°C/400°F For temperatures above 160°C/320°F - Consult the separate APPLICATION INSTRUCTIONS. In water (maximum gradient 15°C/27°F): 95°C/203°F Part of Group Assortment. Local availability subject to confirmation. In accordance with ARAMCO's specification APCS 2A, 2B and 2C. Conforms to Norsok M-501, system no. 3C, 3D, 3E and 3F. Approved by Water Research Centre (WRAS), Great Britain, for potable water up to 23°C/73°F. Complies with Section 175.300 of the Code of Federal Regulations Title 21 – Liquid and Dry Foodstuff. Consult Hempel for details.

Product Details:

HEMPADUR AvantGuard 750
HEMPADUR AvantGuard 750 is a two-component, activated zinc-rich epoxy primer in compliance withthe requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002. Can utilizeASTM D520, type II zinc dust.As a versatile primer for long-term protection of steel in severely corrosive environments.Maximum, dry exposure only: 160°C/320°F.Part of Group Assortment. Local availability subject to confirmation.Complies with European Fire Standard EN 13501-1; classification B-s1, d0.Complies with EU Directive 2004/42/EC: subcategory j.• Reduces the effect of corrosion and offers excellent protection• Good mechanical strength, also in cyclic temperatures, with improved crack resistance through highflexibility and self-healing of micro cracks• High tolerance to different climatic conditions (high temperature and humidity) during application, aswell as, to high dry film thickness• Conforms to NORSOK M-501, Ed, 6, system no.1

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only HEMPADUR AvantGuard 750 HEMPADUR AvantGuard 750 is a two-component, activated zinc-rich epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust. As a versatile primer for long-term protection of steel in severely corrosive environments. Maximum, dry exposure only: 160°C/320°F. Part of Group Assortment. Local availability subject to confirmation. Complies with European Fire Standard EN 13501-1; classification B-s1, d0. Complies with EU Directive 2004/42/EC: subcategory j. • Reduces the effect of corrosion and offers excellent protection • Good mechanical strength, also in cyclic temperatures, with improved crack resistance through high flexibility and self-healing of micro cracks • High tolerance to different climatic conditions (high temperature and humidity) during application, as well as, to high dry film thickness • Conforms to NORSOK M-501, Ed, 6, system no.1

Product Details:

Hempadur Mastic 45880
DescriptionHempadur Mastic 45880 is a polyamide curing, high solids epoxypaint. It forms a hard and tough coating, has good wetting propertiesand cures at low temperature.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds: subcategory j.Recommended useHempadur Mastic 45880 is recommended as a self-primed, surfacetolerant paint system, or as an intermediate or a topcoat in systemswhere low VOC and high film build are required. The product can beused when extended recoating properties for polyurethane topcoatsare required. It may also be used directly on zinc silicate or spraymetallised surfaces. The product can be used for minor repairs inimmersed areas.Service temperature:- Maximum, dry exposure only: 120°C [248°F].

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Hempadur Mastic 45880 Description Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j. Recommended use Hempadur Mastic 45880 is recommended as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required. The product can be used when extended recoating properties for polyurethane topcoats are required. It may also be used directly on zinc silicate or spray metallised surfaces. The product can be used for minor repairs in immersed areas. Service temperature: - Maximum, dry exposure only: 120°C [248°F].

Product Details:

Hempadur Multi-Strength 45751
DescriptionHempadur Multi-Strength 45751 is a self-priming, high-build, epoxypolyamide/amine coating which cures to an abrasion and corrosionresistant coating. Applicable by standard, heavy-duty airless sprayequipment.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds: subcategory j. The product isalso available in a glass flake version for improved abrasion andchemical resistance.Recommended useHempadur Multi-Strength 45751 is recommended as a heavy dutycoating for areas exposed to abrasion and aggressive corrosiveclimate such as ramps, ship hulls and holds of bulk carriers. Theproduct is also suitable for ballast tank coatings for special purposessuch as chemical carriers carrying hot cargoes and other purposeswhere a pure epoxy coating is requested. Is applicable as a finishingcoat where a cosmetic appearance is of less importance.Hempadur Multi-Strength 45751 is intended for use in warm climates.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Hempadur Multi-Strength 45751 Description Hempadur Multi-Strength 45751 is a self-priming, high-build, epoxypolyamide/ amine coating which cures to an abrasion and corrosion resistant coating. Applicable by standard, heavy-duty airless spray equipment. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j. The product is also available in a glass flake version for improved abrasion and chemical resistance. Recommended use Hempadur Multi-Strength 45751 is recommended as a heavy duty coating for areas exposed to abrasion and aggressive corrosive climate such as ramps, ship hulls and holds of bulk carriers. The product is also suitable for ballast tank coatings for special purposes such as chemical carriers carrying hot cargoes and other purposes where a pure epoxy coating is requested. Is applicable as a finishing coat where a cosmetic appearance is of less importance. Hempadur Multi-Strength 45751 is intended for use in warm climates.

Product Details:

HEMPATHANE TOPCOAT 55210
HEMPATHANE TOPCOAT 55210 is a two-component, glossy acrylic polyurethane coating, cured withaliphatic isocyanate, with good gloss and colour retention.As a finishing coat for protection of structural steel in severely corrosive atmospheric environment,where light-fastness and gloss retention are required.Minimum temperature for curing is -10°C/14°F.Maximum, dry exposure only: 120°C/248°F see REMARKS overleafPart of Group Assortment. Local availability subject to confirmation.Complies with European Fire Standard EN 13501-1; classification B-s1, d0.Approved as a low flame spread material when used as part of a predefined paint system. Please referto “Declaration of Conformity” on www.Hempel.com for further details.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only HEMPATHANE TOPCOAT 55210 HEMPATHANE TOPCOAT 55210 is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention. As a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F. Maximum, dry exposure only: 120°C/248°F see REMARKS overleaf Part of Group Assortment. Local availability subject to confirmation. Complies with European Fire Standard EN 13501-1; classification B-s1, d0. Approved as a low flame spread material when used as part of a predefined paint system. Please refer to “Declaration of Conformity” on www.Hempel.com for further details.

Product Details:

HEMPAPRIME Multi 500 Summer
Hempaprime Multi 500 is a two-component, fast drying, high solids epoxy paint. It provides hardwearing and long lasting barrier protection in coating systems for severe corrosive environments.Hempaprime Multi 500 is recommended as a high-build, intermediate coat in high performance coatingsystems where fast handling and short over-coating times are required. Due to its fast drying, theproduct is excellent for projects where fast throughput is key.The product can also be used as self-priming coat and a finishing coat in heavy-duty coating systems.Suited for application down to 10°C/50°F.Maximum, dry exposure only: 120°C/248°FPart of Group Assortment. Local availability subject to confirmation.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only HEMPAPRIME Multi 500 Summer Hempaprime Multi 500 is a two-component, fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. Hempaprime Multi 500 is recommended as a high-build, intermediate coat in high performance coating systems where fast handling and short over-coating times are required. Due to its fast drying, the product is excellent for projects where fast throughput is key. The product can also be used as self-priming coat and a finishing coat in heavy-duty coating systems. Suited for application down to 10°C/50°F. Maximum, dry exposure only: 120°C/248°F Part of Group Assortment. Local availability subject to confirmation.

Product Details:

Hempadur Fast Dry 17410
DescriptionHempadur Fast Dry 17410 is an epoxy paint, which combines highvolume solids with a short drying time. It contains zinc phosphate forbetter corrosion protection.Recommended useHempadur Fast Dry 17410 is suitable for onshore corrosion protectionof new-build steel constructions where fast to handle and shortovercoating times are required, such as steel for factory buildings,stadiums, exhibition halls, airports, power plants, refineries, chemicaland petrochemical plants.Service temperature:- Maximum, dry exposure only: 140°C [284°F].

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Hempadur Fast Dry 17410 Description Hempadur Fast Dry 17410 is an epoxy paint, which combines high volume solids with a short drying time. It contains zinc phosphate for better corrosion protection. Recommended use Hempadur Fast Dry 17410 is suitable for onshore corrosion protection of new-build steel constructions where fast to handle and short overcoating times are required, such as steel for factory buildings, stadiums, exhibition halls, airports, power plants, refineries, chemical and petrochemical plants. Service temperature: - Maximum, dry exposure only: 140°C [284°F].

Product Details:

Hempel's Galvosil 15780 Inorganic Zinc Silicate
Hempel's Galvosil 15780 is a two-component, medium-zinc, solventborne,selfcuring inorganic zinc silicate coating. Applicable by airlessspray.Hempel's Zinc metal pigment 97170 is in full compliance with ISO3549 and ASTM D520 type II.

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only Hempel's Galvosil 15780 Inorganic Zinc Silicate Hempel's Galvosil 15780 is a two-component, medium-zinc, solventborne, selfcuring inorganic zinc silicate coating. Applicable by airless spray. Hempel's Zinc metal pigment 97170 is in full compliance with ISO 3549 and ASTM D520 type II.

Product Details:

Hempel's Silicone Aluminium 56914 Heat Resistant Aluminium

Hempel's Silicone Aluminium 56914 is a heat resistant aluminiumpigmented polysiloxane paint which cures to a hard film at ambientconditions.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds: subcategory i.

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only Hempel's Silicone Aluminium 56914 Heat Resistant Aluminium Hempel's Silicone Aluminium 56914 is a heat resistant aluminium pigmented polysiloxane paint which cures to a hard film at ambient conditions. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.

Product Details:

Hempathane HS 55610 Polyurethane Top Coat
Hempathane HS 55610 is a glossy polyurethane topcoat, cured withaliphatic isocyanate. The product has good gloss and colour retentionand contains zinc phosphate.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds: subcategory j.

Additional Information:

• Packaging Details: Availble Pack Size in 20 Ltr Only Hempathane HS 55610 Polyurethane Top Coat Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

Product Details:

Thinner is Nitro cellulose thinner. It is a mixture of esters, glycol, alcohol, aromatic solvents and ketones suitable diluents to all nitro products. It is manufactured for reducing lacquers before they are applied by different methods. Mainly used for solvent based nitro product.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only

Product Details:

Hempadur 15553 Primer
DescriptionHempadur 15553 is a two-component epoxy paint. It cures to aflexible, well adhering coating with good abrasion and impactresistance. Contains zinc phosphate. Cures down to -10°C/14°F.Complies with EU Directive 2004/42/EC, The Paints Directive on thelimitation of volatile organic compounds: subcategory j.Recommended useAs a primer for systems on hot dipped galvanized, aluminium, steeland stainless steel surfaces in moderately to severely corrosiveenvironments.Hempadur 15553 is also suited when roughening of the surface is notpossible. Please see surface preparation overleaf.Service temperature:- Maximum, dry exposure only: 140°C [284°F].

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only Hempadur 15553 Primer Description Hempadur 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j. Recommended use As a primer for systems on hot dipped galvanized, aluminium, steel and stainless steel surfaces in moderately to severely corrosive environments. Hempadur 15553 is also suited when roughening of the surface is not possible. Please see surface preparation overleaf. Service temperature: - Maximum, dry exposure only: 140°C [284°F].

Product Details:

thinner is based on various solvent in order to achieve optimal performance, featuring fast drying and great compatibility

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only

Product Details:

Thinner is Nitro cellulose thinner. It is a mixture of esters, glycol, alcohol, aromatic solvents and ketones suitable diluents to all nitro products. It is manufactured for reducing lacquers before they are applied by different methods. Mainly used for solvent based nitro product.

Additional Information:

• Packaging Details: Available Pack Size in 20 Ltr Only

Product Details:

Hempafire Optima 500 very low VOC one component waterborne acrylic thin film intumescent coating
Hempafire Optima 500 is a very low VOC, one-component waterborneacrylic thin film intumescent coating for passive fire protection ofstructural steel against cellulosic fires. It has been optimized for Onsiteapplications at R120. Applications in shop and/or R180 may bepossible depending on the project.

Additional Information:

• Packaging Details: 20 Ltr Only Hempafire Optima 500 very low VOC one component waterborne acrylic thin film intumescent coating Hempafire Optima 500 is a very low VOC, one-component waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires. It has been optimized for Onsite applications at R120. Applications in shop and/or R180 may be possible depending on the project.