Good Morning Paints Private Limited

CLEAN TECH HB 150 SOLVENT FREE, SELF-LEVELING EPOXY COATING
CLEAN TECH HB 150 is a two component ,solvent free,pigmented, modified resin system which forms a smoothself- leveling seamless flooring with good hardness, impactand abrasion resistance, impermeable to water, glossy anddurable. Available in 0.15 mm thickness

CLEAN TECH SLV 300 Low viscosity Moisture Tolerant Epoxy Primer for Concrete
CLEAN TECH SLV 300 is a 100 % solid low viscosity epoxypolymer especially designed for use as a primer for freshconcrete. It also extend the life of concrete surfaces.CLEAN TECH SLV 300 penetrates into concrete surfaces andinto the smallest of cracks extending the life of both new and oldconcrete, forming a protective barrier which will effectivelyprotect surfaces from intrusion of water, salts, ions, and waterborne contaminants.

CLEAN TECH PW High Build Epoxy Food Grade Coating System
High Build EPOXY FOOD GRADE Coating Sys tem for Potable Water Tanks and Internal Pipelines
DescriptionCLEAN TECH PW is a two component solvent free coatingtechnology formulated with special grade resin, hardener,non-toxic pigment & additives designed for use as a liningsystem for the protection of tanks, pipelines & otherequipment used for handling potable water in pharma, food,biotechnology & drink processing, or for any applicationinvolving carrying potable water lines. This coating is foodsafe and certified by Central Food Technological ResearchInstitute, India.It can be applied on RCC / plastered surfaces after applyingappropriate primer, and of course on metallic pipelines / tanksafter blast cleaning. The product meets the performancerequirement of AWWA-C 210 and IS 3589:2001 Edition 4.2.Conforms to US- FDA 175-300 for Global Migration StandardTest intended for use with potable water tank. It also meets therequirement of BS 6920-1-2000.This is Water Regulatory Advisory Scheme ( WRAS )Approved Material for Contact with Potable WaterAPPROVAL NUMBER: 1811565

CORRO TECH EGF 300 
Surface Tolerant High Build Epoxy Glass Flake Coating
CORRO TECH EGF 300 is two component high build epoxysurface tolerant coating reinforced with glass flakes havinghigh resistance to corrosion for normal, industrial, offshoresteel and concrete structures. It is surface tolerant and it hasgood adhesion and performance properties even on poorlyprepared surfaces or on aged coatings

CORRO TECH VEP Vinyl Ester Glass Flake Primer......
CORRO TECH VEP is a primer on both metal andconcrete surfaces for CORRO TECH VEGF-500/540. It isalso be used for adhesion promotion between existingCORRO TECH VEGF-500/540 and a repair or new topcoat.

CORRO TECH VEGF- 540 High Build Glass Flake Vinyl Ester Coating
CORRO TECH VEGF-540 is a two pack glass flake fillednovolac vinyl ester coating to provide outstandingChemical resistance with high temperature resistance. Itis used in aggressive atmospheric or spillage condition.

CLEAN TECH FLAME PROOF SP Single Component Water Based Intumescent Coating
CLEAN TECH FLAMEPROOF S.P is a high performancewater based fire protection / intumescent coating systemspecially developed for use on steel work capable of givingup to 1 hours fire protection.CLEAN TECH FLAMEPROOF S.P conforms the firresistance according to EN 13381 – 8 : 2010AdvantagesCLEAN TECH FLAMEPROOF S.P. formulation is based ona special fire and flame resistance resins and highly efficientintumescent pigments and fillers, which provide theoptimum resistance to fire propagation. The completeformulation of the coating minimizes flame spread.

CLEAN TECH FLAME PROOF LS Single Component Water Based Intumescent Coating
CLEAN TECH FLAMEPROOF L.S is a high performancewater based fire intumescent coating system speciallydeveloped for internal wooden and cementitious surfaceswhere fire safty is a major.AdvantagesCLEAN TECH FLAMEPROOF L.S. formulation is based ona special fire and flame resistance resins and highly efficientintumescent pigments and fillers, which provide theoptimum resistance to fire propagation. The completeformulation of the coating minimizes flame spread.

CLEAN TECH FLAME PROOF Single Component Water Based Flame Protection Intumescent Coating
CLEAN TECH FLAMEPROOF is a high performance waterbased fire protection / intumescent coating system speciallydeveloped to restrict spread of flame along cables.AdvantagesCLEAN TECH FLAMEPROOF formulation is based on aspecial thermoplastic resin combined with highly efficientfire retardant pigments, fillers and fibres, which provide theoptimum resistance to fire propagation. The completeformulation of the coating minimizes flame spread.