Good Morning Paints Private Limited

Pentadur Glass Flake Epoxy 3580
Heavy Duty, Zero VOC, High Build, Special Aliphatic Amine cured epoxy Coating containingspecial graded glass flakes. The Product contains non toxic constituents which are non carcinogenicand has no health hazardsTo be applied in new construction as a high corrosion/abrasion resistant lining for long termprotectionProduct is capable to be applied where resistance to all type of mild chemicals , Oils ,Lubricants spillage, Acid, Alkali, Wet soil, Chemical sludge etc is required . This can withstand Chlorides and Sulfates present in soil and can be used for external of buried pipeline also.Permeability to water vapors corrosion is of high standard._______________________________________________________________________

Pentadur Universal Primer Universal epoxy anticorrosive primer
Pentadur Universal primer is a general-purpose epoxy primer in protective coating system for steel & non-ferrous metals.__________________________________________________________________________

Pentadur HB 5520 F-6B High Build Polyamide Cured Epoxy finish

Pentadur HB 5540 is a High Build Polyamide Cured Epoxy finish paint. This product has excellentresistance to fresh and seawater, diesel oil, petrol, jet fuel, lubricating oil and related products. It hasgood resistance to various chemicals, acids and alkalis and it is recommended as High Build Tanklining

Pentadur 8538 MA Primer epoxy anticorrosive High Build primer
Pentadur 8538 MA is Two pack polyamide cured, epoxy anticorrosive High Build primer containingTio2 pigment and water relent corrosion inhibitors. This has extremely goo adhesion on metal andfibre glass substrate and recommended for under water surfaces including sea water immersion

PENTALINE 1000 (WRAS) Epoxy lining for drinking water lines
PENTALINE 1000(WRAS) is Water Regulatory Advisory Scheme (WRAS) approved product for contact with Potable Water as per BS -6920. It meets the requirements of 21-CFR-US-FDA for contact with Potable water & food and, meets all the requirements as per AWWA- C 210-07.
PENTALINE 1000(WRAS) is a heavy duty, zero VOC, high build, special amine cured epoxy coating suitable for application on new construction as a single/double coat for long-term protection. It is specially designed for drinking water storage and pipelinesThe product is also capable to withstand all type of acidic water ,mild chemicals, oils and lubricants spillage. When applied, it forms a dense cross-linked film with lowest permeability to water vapors.

PENTALINE DT-750 Food grade Epoxy CoatingPENTALINE DT-750 is Water Regulatory Advisory Scheme (WRAS) approved product for contact with Potable Water as per BS -6920. It meets the requirements of 21-CFR-US-FDA for contact with Potable water & food and, meets all the requirements as per AWWA- C 210-07.PENTALINE DT-750 is a high solid, low VOC, high build, special amine cured epoxy coating suitable for application on new construction for long-term protection. It can be applied directly to prepared metal surface or over a recommended epoxy primer.The product is recommended where resistance to all type of water, mild Chemicals, Oils, Lubricants spillage is required. When applied, it forms a dense cross-linked film with lowest permeability to water vapors. It has high resistance to cathodic disbondment.

A tarfree, polyamide cured epoxy coating with an excellent seawater- and corrosion resistance. The product is high-build and can be applied at 250 micron dry film thickness in a single coat. Transpoxy Barrier offers good levelling- and wetting properties which enables tolerance to a lower degree of surface preparation. The product complies with FDA §175.300 for the carriage of dry foodstuffs. For faster curing at ambient temperatures or at application at temperatures down to 0° C, a special hardener is available.

A high gloss polyurethane finish for marine- and industrial environments. The product provides excellent durability and offers high gloss and excellent colour retention. Can be applied by airless spray as well as by brush and roller. When combined with Transpoxy Barrier, Transothane Finish has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.

A high quality, modified alkyd topcoat for use on boottop, topsides, decks and superstructures. The product has good durability and offers good gloss and colour retention. The product is available in many colourshades and is easy to apply. When combined with Transogard Primer, Transunilac Finish has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.

EIL F-16 PENTATHERM CUI Inert Polymeric Matrix Reinforced Polysiloxane 
Low VOC, Zinc Free ,Two components high build, ambient temperature curing inert Polymeric matrix with High temperature and abrasion resistant pigment based on Polysiloxane coating for use under insu-lation. This is also recommended for hot stacks and pipelines which remain exposed to atmosphere. Suitable for Cyclic temperature variation

Pentadur Glass Flake Epoxy 3580Glass Flake Filled Epoxy Lining
Heavy Duty, Zero VOC, High Build, Special Aliphatic Amine cured epoxy Coating containingspecial graded glass flakes. The Product contains non toxic constituents which are non carcinogenicand has no health hazardsTo be applied in new construction as a high corrosion/abrasion resistant lining for long termprotectionProduct is capable to be applied where resistance to all type of mild chemicals , Oils ,Lubricants spillage, Acid, Alkali, Wet soil, Chemical sludge etc is required . This can withstand Chlorides and Sulfates present in soil and can be used for external of buried pipeline also.Permeability to water vapors corrosion is of high standard.

Pentadur HB MIO 5567 is two pack High Build Epoxy polyamide intermediate coat containing lamellar Micaceous Iron Oxide and Tio2 as pigment. It has got an excellent resistance to high humidity, water, petrol, diesel, etc.It also has good resistance to abrasion and impact

Pentathane 1000 SD Solvent Free Polyurethane
Heavy Duty , Zero VOC, two components solvent free, Elastomeric Polyurethane Coating to be applied on new construction as well as maintenance coating.Product is suitable for use on steel surfaces where resistance to all type of mild chemicals, Oils, lubricants spillage, sea water, wet soil is required. This coating forms a densely cross linked flexible film with lowest permeability to water vapours. Can also be applied over concrete surfacesThis meets the requirement of BS:6920 -1-2000 & AWWA C222-2000 also ISO 21809-3. It is approved by WRAS which makes it suitable for Internal and external of drinking water pipelines. It also has excellent UV resistance. Product is Very Fast Cure, which can be put in early services.

Transunilac Finish 331 TO 3.31 modified alkyd topcoatA high quality, modified alkyd topcoat for use on boottop, topsides, decks and superstructures. The product has good durability and offers good gloss and colour retention. The product is available in many colourshades and is easy to apply. When combined with Transogard Primer, Transunilac Finish has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.

Transocean Optima 234 self erodable antifouling pigmented
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.Typically offers protection up to 18 months in areas with moderate fouling pressure. Extended protection periods may be achieved in areas with a lower degree of fouling activity.The product can be applied on all Transocean anticorrosive systems. Product complies to IMO Antifouling System Convention compliant (AFS/CONF/26).

Pentadur Mastic 5517 self priming surface tolerant
Pentadur Mastic 5517 is a self priming surface tolerant high solid polyamino amide cured epoxy paint with excellent wetting properties. It has excellent property of adhesion on old aged coating and provide high corrosion resistance propertyIt forms a tough and hard film having excellent abrasion and impact resistance. It has good resistance to sea water mineral oils, petrol, jet fuel, lubricating oil, acid and chemicals.

A two-pack, modified epoxy designed as a tiecoat or sealer on epoxy anticorrosive systems in order to improve the adhesion of subsequent antifouling systems. It offers a very long recoating window with single-pack and 2-pack finishes and therefore can be used in marine paint systems above and below the waterline. It can also be used as a sealer on old and polished through antifouling system as the product provides good compatibility with various antifouling systems. Transvinypox has excellent flexibility and adhesion to a variety of substrates such as aluminium, galvanized steel, wood and glass fibre reinforced polyester. The product cures down to temperatures of 0°C and tolerates a lower degree of surface preparation.

Transpoxy Masterbond BT is an high solids primer/coating with excellent anticorrosive properties under severe corrosive conditions. The product has an increased tolerance to damp substrates and can be used at temperatures down to 0°C. Transpoxy Masterbond BT offers good adhesion to blast cleaned steel, weathered (shop) primers as well as a variety of aged coatings. In maintenance conditions it tolerates a lower degree of surface preparation and can be used in combination with mechanical power tooling or high pressure water jetting as surface preparation. Due to its phenolic functional epoxy-amine crosslinking, the products offers good chemical resistance against various fuels and hydrocarbons. The product carries various (system) approvals from oil companies and is an approved coating according to IMO-PSPC for usage in Crude Oil - and Ballast tanks.

PENTOLITE HHR 4951 UPTO 600 0C
PENTOLITE HHR 4951 is a high performance physically drying silicon aluminium paint
Clean the surface by thorough scraping, hard wire brushing, sand papering to removerust and other loose materials. Blast the surface by abrasive blasting to Sa 2½, foroptimum results. If blasting is not practicable, then clean the surface by wire brushingand other mechanical tools.

EIL F-12 PENTOLITE HHR 4951 UPTO 600 0C Silicon Aluminium

PENTOLITE HHR 4951 is a high performance physically drying silicon aluminium paint.

A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae. Typically offers protection up to 36 months for ocean-going vessels with medium activity. Also suitable for vessels trading in coastal waters. The product can be applied on all Transocean anticorrosive systems. Product complies to IMO Antifouling System Convention compliant (AFS/CONF/26).

Pentathane HS 4510 Aliphatic Acrylic Polyurethane
It is Aliphatic - Acrylic Polyurethane Coating containing high Titanium di oxide content and based on Eco friendly Trimmer Technology . It has a high degree of gloss retention properties.This product has High Volume Solid and in a blend of Nano Technology and Eco friendly additives. Product is resistant to all type of mild chemicals , Oils , lubricants spillage . When applied over properly primed surface forms a very densely cross linked film with lowest permeability to water vapors.Product is based on very Fast Cure Technology ,which can be put the painted surfaces in early services

Pentadur HB ZP 8531 Primer EIL:P-6Epoxy based Zinc Phosphate Primer
Pentadur HB ZP 8531 Primer Two pack Poly amine cured, epoxy resin rich anticorrosive High Build primer containing zinc phosphate pigment. This is designed to provide high thickness and high over coating interval due to presence of reinforced resin system. Contains only food grade pigments and resin system.

Transogard Primer
Transogard primer is a high build alkyd primer for an excellent protection of steel structures against corrosion in industrial and marine environments. The product offers good levelling properties and adheres well on powertool prepared substrates. It can be recoated with Transunilac- and Transacryl Finishes and some cases with two-pack coating systems. Not suitable for constant immersion or recoating of zinc primed steel. When combined with Transunilac Finish, Transogard Primer has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.

EIL P7-Pentazinc CSG Cold Spray Galvanizing
Pentazinc CSG is a Single Component Epoxy with high loading of metallic super fine Zinc which impartsCathodic protection to base metal and also prevents under film creeping corrosion. This is a Cold SprayGalvanizing material a fast drying type primer which help early recoat ability. Product contains 95% Zincin dry film by weight and confirms to SSPC-Paint 20 Type-II-Level-I Organic Zinc Rich Primer, ZincDust confirming to ASTM D-520 Type III.Pentazinc CSG is a Single Component Epoxy with high loading of metallic super fine Zinc which impartsCathodic protection to base metal and also prevents under film creeping corrosion. This is a Cold SprayGalvanizing material a fast drying type primer which help early recoat ability. Product contains 95% Zincin dry film by weight and confirms to SSPC-Paint 20 Type-II-Level-I Organic Zinc Rich Primer, ZincDust confirming to ASTM D-520 Type III.